Specifications:

Magnetic Pole Gap: 0.5-1.5, Copper Strips = 0.5, Gap = 1.5

Holding Power: ≥120N/cm²

Residual Magnetism: ≤2N/cm²

Standard Configuration: One chuck, one wrench, one set of clamping screws.

Maintenance and Care:

Wipe the chuck clean before use to avoid scratching the surface and affecting accuracy.

Operate within a temperature range of -40°C to 50°C, and avoid impacts to prevent a decline in magnetic force.

After use, apply rust preventive oil to the working surface to prevent rust and corrosion.